 |
|
 |
|
 |
| a
complete building with roof panels on a single pallet
ready for assembly |
|
remove
the outer packaging |
|
loosen
the ratchet straps holding the modules and panels to the
pallet |
 |
|
 |
|
 |
| all
components can be carried into place by 5/6 people |
|
place
the 1st module in the assembly area |
|
loosen
the transit screw which holds the pivot pin in place |
 |
|
 |
|
 |
| remove
the pivot pin from the folded module |
|
open
out the 1st wall panel to 90° and replace the pivot pin |
|
repeat
the process with the 2nd module and attach to the 1st
module using the locating and pivot pins |
|
|
|
|
|
| modules
are manufactured with toughened locating pins at the base
|
|
and
pivot pins at the top |
|
attach
the 3rd module to the assembly leaving one end open to accept
the floor panels |
|
|
|
|
|
| take
a floor panel from the pallet |
|
and
slide it into the Kabin onto the floor supports |
|
after
inserting the floor panel connector, take the 2nd floor
panel and repeat the process. Close the end wall panel
|
|
|
|
|
|
- take
the "female" roof panel, place your tallest people
nearest to the Kabin
|
-
|
- and
lift onto the top of the Kabin
|
-
|
- lift
the "male" roof panel and repeat the procedure
|
| |
|
|
|
|
| |
|
the
Kabin structure is complete and ready to use as a workplace
or for accommodation |
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| all
Kabins come fully wired and ready to accept external power
|
|
all
Kabins are fully earthed |
|
the
floor panels easily slide into the Kabin on special floor
brackets |
|
|
|
|
|
| the
roof panels are either "female" |
|
or
"male" and locate together with simple placement
|
|
all
roofs are edged with a high density rubber skirt
|
|
|
|
|
|
| assembly
requires a minimum of labour |
|
assembly
requires a minimum of tooling |
|
the
pallet is re-usable and ready for the Kabins next destination
|
| |
|
|
|
|
| |
|
  |
|
|
| |
|
|
|
|
| |
|
 |
|
|
